 |
We are Equipped with:
 |
Semi automatic moulding loop line. |
|
|
| |
|
 |
|
Melting shop is equipped with two medium frequency Induction
furnaces of 400 & 1000 KW, with varying crucibles of 100kg,
400kg, 900kg, 1500kg and 3000kg. At Intrux we have bottom
pouring as well lip pouring ladle which accommodate castings
size of few kgs to 2200kgs. |
|
Shakeout unit: for cleaning and removal of sand from the
poured mould. |
|
Grit blasting and shot blasting. |
|
|
| |
|
 |
|
Heat treatment shop is equipped with gas fired furnaces,
maximum temperature we are attending is 1150 Deg Cent.
Heat treatment furnaces are monitored by UNISCAN software
to know real trends of different zone for individual furnace. |
|
|
| |
|
| Testing Equipments |
|
 |
|
Spectrophotometers - SPECTROMAXx direct reading optical emission spectrometer - Spectro Germany
(Two base: Fe-Ni, 24 elements) |
|
|
| |
|
 |
|
Chemical (Wet) analysis laboratory |
|
|
| |
|
 |
|
Mechanical Testing Laboratory: Ys, Ts, % of elongation,
reduction of area and Impact test @ room temp to -196°C). |
|
|
| |
|
 |
|
Hardness Testing |
|
Metallography Laboratory |
|
Inter Granular Corrosion Test (IGCT) facility for practice A,B,E,C & F |
|
|
| |
|
 |
|
Dye (Liquid) penetrant test facilities.- ASNT Level II |
|
|
| |
|
 |
|
Magnetic Particle testing- Dry and Wet method ASNT Level II
|
|
|
| |
|
 |
|
Radiography: Source-IR-192 & Co-60 isotopes.- ASNT Level II |
|
Ultrasonic testing- ASNT Level I
|
|
RAD CHECK METER With External Detector, Type no. RC705B,
Range Covered 0-10,000 µR/ hr
|
|
|
